Transform a regular crew neck into a v-neck with or without sewing
Co-authored byRhonda Haleand Devin McSween
Last Updated: June 18, 2024Fact Checked
We’ve all got one: a stack of old t-shirts that you’d love to wear if only they were V-necks. Well, cutting a t-shirt into a V-neck is as easy as grabbing a pair of scissors. We’ve put together simple step-by-step instructions that show you how to measure and cut your shirt into a V-neck by sewing down the existing collar or cutting it completely off. If you’re ready to transform some t-shirts, read on!
Things You Should Know
- Mark where you want the point of the V-neck to rest. Then, fold the shirt in half vertically and draw a diagonal line from the point to each shoulder seam.
- Remove the stitches connecting the collar to the front side of your shirt. Then, cut through the middle of the collar and along the V-neck outline.
- Stretch the rough side of each collar piece along the rough side of the neckline and sew the pieces together.
Method 1
Method 1 of 3:
Measuring the V-Neck
1
Gather your materials. To cut a V-neck, you need a crew neck shirt, a ruler or measuring tape, stick pins, a fabric marker, fabric scissors, and a seam ripper. If you want to sew the collar back on your shirt, then you’ll also need thread that’s the same color as your shirt and a sewing machine or sewing needle.
- If you’re using a measuring tape, grab a straight edge to help you draw straight lines.
2
Measure how deep you want the V-neck to be. Lay a V-neck shirt that you like over your t-shirt as a guide. Mark the spot where you want the point of the V to go with a pin, then fold the shirt vertically in half. Lay it flat on a table and line up the shoulders. Then, use a ruler to measure the distance from the point where the collar meets the shoulder seam to the point of the V. Write down this measurement.
- If you’re sewing the existing collar to your shirt, the V has to be no longer than 2 inches (5 cm) from the bottom of the collar. If it’s deeper than that, the collar won’t fit around the new V neckline.
- If you don't have another V-neck shirt, simply eyeball how deep you want the V-neck to be. It's better to be on the conservative side, as you can always make the V deeper later.
- If you’re having trouble visualizing the V-neck, try on your shirt. Look in the mirror and mark the spot you'd like the point of the V with a pin.
3
Fold your t-shirt in half vertically. Lay your t-shirt face down on the table, then fold one side over to the other. The front of the collar is now on the outside of the fold. Make sure that the neckline, the shoulders, and the arms match up exactly. Then, smooth down all the edges until the shirt is free of wrinkles.[1]
4
Trace the outline of the V-neck with a fabric marker. Make a diagonal line with your ruler, placing it where the shoulder seam meets the collar down to the middle of the chest. Using the measurements you took in the previous step, mark off the point of the V with a fabric marker. Then, draw a line between the mark and the point where the shoulder seam meets the collar.
- Flip the shirt over and repeat this step on the other side.
Method 2
Method 2 of 3:
Sewing a V-Neck Collar
1
Turn the shirt inside out and remove the stitches around the front collar. Unfold your t-shirt, flip it inside out, and lay it flat on the table with the front side facing you. Using a seam ripper, push the tip of the tool under the stitch sewn between the collar and the shirt at the shoulder seam. Pull the seam ripper up to cut through the thread. Continue to cut through the threads until you get to the other shoulder seam.[2]
- If you don't have a seam ripper, use a sharp pair of scissors to carefully cut through the threads.
- Make sure to leave the collar attached to the back of the shirt.
2
See AlsoHow-To Wire Lights & Switches in a DIY Camper Van Electrical SystemConfigurez votre claustra sur mesure - UnikiwiNatalya Wright looks incredible in TINY black feathered dressThe Ultimate A to Z Guide to Cycling LingoTurn your shirt back to the correct side and smooth it on the table. Unfold your t-shirt and flip it back right side out. Lay it on your table and press it down to remove any wrinkles. Then, fold the front of the collar backwards so it is away from the front of the shirt. This helps you make a smoother and straighter cut free from mistakes.
3
Cut along the V-neck outline. Starting on one side of the V-neck outline, use a pair of sharp fabric scissors to cut along the marked line. Be careful to only cut through the front side of the shirt. Stop cutting when you reach the point. Then, repeat this process on the other side.
4
Cut the front of the detached collar in the center. Lay your t-shirt flat with the front side facing you. Measure the length of the collar with your ruler and use your fabric marker to place a dot in the middle. Then, cut through the collar at this point.[3]
5
Stretch each side of the cut collar along the length of your V-neck. To get your collar to reach your new neckline, you have to stretch it out a little. Most crew neck t-shirt collars are made out of a ribbed fabric that stretches easily. Just tug and pull each side of the collar down to the V point to lengthen the collar.[4]
- If your collar doesn’t reach all the way to the point of the V, pull and stretch out each side again. If it still doesn’t stretch all the way, your V might be too deep. Just go to your local craft store and buy a ribbed fabric that matches your collar.
6
Pin the rough edges of the collar to the rough edges of the V-neck. Hold your shirt as flat and taut as you can. Then, stretch one side of the collar along the length of the V, placing a pin between the collar and shirt to hold them together. Continue to stretch the collar along the edge of the V, inserting 1 pin about every 1 inch (2.5 cm). When you get to the point of the V, do the same thing on the other side.[5]
7
Sew from the top of the collar to about 1 inch (2.5 cm) above the V point. Use a sewing machine or a needle and thread to sew about a ¼ inch (0.6 cm) away from the rough edges of the collar and neckline. If you’re sewing by hand, a simple running or back stitch will do the trick.[6] Just stop sewing when you get about 1 inch (2.5 cm) above the point of the V.[7]
- Make sure the thread you use matches the color of the shirt.
8
Pull the collar end to the other side of the V, then sew the other collar. Move the bottom of the collar to the other side of the V-neck, lining it up against the rough edge at the point of the V. Pin the collar into place, then sew the rest of it to the shirt. Then, sew down the other side of the collar to 1 inch (2.5 cm) above the V point.[8]
9
Sew the end of the collar to the other collar end on the rough edge. Align the rough edge of the bottom of the collar to the rough edge of the other collar end that you already sewed down. The bottoms of the collar overlap to create a V point. Then, simply sew the collar ends together to finish off your shirt![9]
- If you have any puckering at the point of the V, use an iron to press the hem down.
Method 3
Method 3 of 3:
Cutting a V-Neck (No-Sew Option)
1
Unfold your shirt and cut along the V-neck outline on the front side. Lay your shirt flat on the table with the front facing you. Then, use a pair of fabric scissors to cut down the center of the collar to the tip of the V point. Cut along the marked diagonal lines, stopping when you reach each shoulder seam.[10]
- Be very careful to only cut through the front side of the shirt.
2
Remove the back of the collar by cutting under the seam. Place your scissors just under the seam that secures the back of the collar to the back of your shirt. Then, cut along the curve of the collar to remove it from your shirt. You now have a t-shirt with a V-neck![11]
3
Cut off any ragged ends then pull on the neckline to roll the edges. If you have any jagged edges along your V-neck or around the back collar, clean them up with your scissors.[12] Then, pull on the edges of the V-neck and around the head opening. This stretches the fabric and gets the neckline to roll under, which helps hide any rough edges.[13]
Community Q&A
Question
When you're measuring and cutting, is the t-shit inside out?
wikiHow Staff Editor
Staff Answer
When you're measuring and cutting the t-shirt, keep it right side up instead of turning it inside out.
Question
I don't have a sewing machine and tried this by hand but it was obvious that I need practice. In the mean time, could I leave the cut edge unfinished or will it fray when washed?
wikiHow Staff Editor
Staff Answer
Yes, it's okay to leave the edges unfinished. Instead of fraying, most t-shirt fabrics will slightly roll along the cut edges.
Question
I don't have enough collar to sew it to the V, what do I do?
wikiHow Staff Editor
Staff Answer
If you don't have enough existing collar, you'll have to buy some ribbed fabric that matches the fabric of the collar. Most craft and fabric stores sell ribbed fabric. Then, just sew the fabric to the V-neck outline in the spots where you're missing the collar.
See more answers
Video
Things You'll Need
Measuring the V-Neck
- Crew neck t-shirt
- Flat surface
- Pins
- Fabric marker
- Ruler or straight edge
Sewing a V-neck Collar
- Fabric scissors
- Ruler
- Seam ripper
- Pins
- Sewing machine
- Thread
- Needle
- Iron
- Ironing board
Cutting a V-Neck (No-Sew Option)
- Fabric scissors
You Might Also Like
About This Article
Co-authored by:
Rhonda Hale
Couture Fitting Tailor
This article was co-authored by Rhonda Hale and by wikiHow staff writer, Devin McSween. Rhonda Hale is a Couture Fitting Tailor & Clinical Hypnotherapist based in New York City with additional design studios in Nice, France. With over 12 years of experience in both professions, Rhonda puts the highest vibration and good energy into every stitch she makes. She has been a master tailor and designer since 1990 and works with brides, celebrities, and high-profile clients around the world to serve all their couture needs. Her custom attention to each client has made her voted the Best Couture Fitting Tailor every year since 2015. Rhonda is also certified in Medical and Subconscious Hypnotherapy and Past Life Regression and uses her skills to help clients heal from trauma and accomplish their personal, professional, and life goals. She has been published in Bride Magazine and was recently filmed for a YouTube documentary series, The American Medium in Ireland, on the Paranormal Resident Channel. This article has been viewed 556,185 times.
Co-authors: 7
Updated: June 18, 2024
Views:556,185
Article Rating:100% - 7 votes
Categories: Altering T Shirts
Article SummaryX
To cut a t-shirt into a V-neck, start by using a V-neck shirt you already have as a guide for where to mark the "V" on the t-shirt. After you’ve traced the "V," use sharp scissors to remove the stitches securing the front of the collar. Next, cut out the V-neck, then cut the detached collar down the middle, stretch it along where you marked the "V," and pin it in place. Finally, sew it down, starting at the top of the collar and placing the stitch about 1/4 inch from the edge of the layers. To learn how to make sure your stitching is flat and even, keep reading!
In other languages
- Send fan mail to authors
Thanks to all authors for creating a page that has been read 556,185 times.